CORE2-ROS Boot issue

[byq77]

Hi Gus,
It seems you’ve encountered the same issue like user from this thread:

[Solved] Rosbot 2.0 : hConfig error and microcontroller can't be flashed

Hi, I’m facing a strange issue on my Rosbot 2.0 (Asus Tinker board with latest ubuntu image, ros-2019-02-17) : Leds state : LR1 → constant ON LR2 → constant ON POWER LED → ON For the other leds (LED1 to 3), they first blink in a strange way but then turn off. Ubuntu boots normally, I can access to the desktop it with HDMI and RDP and ROS works as well. Issues : hConfig : I can connect to the rosbot with the HusarionConfigXXX WiFi but it’s not possible to setup the parameters (new Wifi…

Please follow the step by step instructions from the thread. If you happen to have the Raspberry Pi, please install following library on your PI:

$ pip install RPi.GPIO

In commands from the solution use -c rpi option instead -c tinker or -c upboard meant for Asus Tinker Board and Upboard respectively. Please let me know if that cured your board.